Journey 167 TT
Der geräumige 167 ist vielseitig und kippstabil, mit mehr Speed und Ladekapazität für Touren auf größeren Gewässern.Erfahre mehr
As a lightweight option on our composite hulls, Mad River Canoe offers black powder-coated aluminum gunwales. A low-maintenance alternative to the traditional ash, aluminum gunwales that save approximately 3-5 pounds per canoe.
Aluminum gunwales are a "unibody" one- piece construction that incorporates inwale and outwale into one piece.
All above parts are available via your local authorized Mad River Canoe dealer.
With rare exceptions, gunwale re-rail starts marking the hull with locations of seats and components followed by removal of components and then of original gunwales. With aluminum gunwales this is accomplished by drilling out the old rivets. This should allow gunwales to be able to be lifted off of hull once decks are removed.
New gunwales are placed over top edge of hull and pushed down into place. Holes are drilled through the flanges on sides of gunwales and through hull. Rivets are inserted and set in holes to secure gunwales. Decks are reinstalled followed by hanging of outfitting such as yoke, thwart, seats, etc.
If additional information is required, contact your Authorized Mad River Canoe Dealer or call Mad River Customer Service @ 888/ 525-2925.
Aluminum gunwales are basically care free. Over time and use, the black powder coating can be abraded, revealing the natural silver color of aluminum. This is a cosmetic issue only, the function and durability of the gunwale is not affected. If you want to restore the black finish, lightly sand area with fine grit sandpaper and paint with a flat black enamel. Multiple light coats will be longer lasting than one heavy coat. Please note this will not be a permanent "repair" and will likely need periodic repainting.